An efficient heat pump stops after it achieves the temperature you set on the thermostat, usually after about 10 to 20 minutes. However, there are instances when it may run without taking breaks. Below, we will discuss why your heat pump in Mount Juliet, TN might run continuously.
Extreme Outdoor Temperatures
When it’s blistering hot outside during summer, your heat pump may struggle to transfer heat to the environment. Conversely, if it’s too cold during winter, it can take longer for it to warm up your home.
In either case, the system runs without taking breaks. When the heat or cold wave passes, your heat pump should return to normal cycles. If not, it may be time to call for repairs.
Clogged Air Filter
A clogged air filter prevents the free flow of air through the system and over the indoor evaporator coil. With constricted airflow, the heat pump must continuously run to cycle the indoor air. To avoid this, change your air filter every 60 to 90 days.
Dirty Indoor or Outdoor Coils
Dirt and debris may build up on your heat pump’s indoor evaporator coil or outdoor condenser coil. This makes it difficult for the unit to transfer heat efficiently, causing your system to take longer to regulate indoor temperatures. Fortunately, a technician will clean this unit when you schedule maintenance services and make sure the system is running at peak performance.
Refrigerant Leaks
Refrigerant transfers heat in and out of your home, depending on whether your system is in heating or cooling mode. When the refrigerant is low, your heat pump takes longer to eliminate or bring in heat. If the refrigerant is very low, it may not be able to cool your home at all. Schedule repair services whenever you suspect this fluid is leaking.
When your heat pump system runs continuously, allow a technician to inspect it to find the issue. You can call the experts at Derryberry’s Heat & Air for professional HVAC installation services in Mount Juliet, TN.
Image provided by iStock